THIN LAYER CHROMATOGRAPHY:


TLC can be defined as a method of separation or identification or purification of a mixture of components into individual components by using finely divided adsorbent solid / (liquid) spread over a plate and liquid as a mobile phase.

 

Principle of Thin Layer Chromatography (TLC)


       Thin-layer chromatography is performed on a sheet of glass, plastic, or aluminium foil, which is coated with a thin layer of adsorbent material, usually silica gel, aluminium oxide (alumina), or cellulose. This layer of adsorbent is known as the stationary phase.

       After the sample has been applied on the plate, a solvent or solvent mixture (known as the mobile phase) is drawn up the plate via capillary action. Because different analytes ascend the TLC plate at different rates, separation is achieved.

       It is thus based on the principle of adsorption chromatography or partition chromatography or combination of both, depending on adsorbent, its treatment and nature of solvents employed. The components with more affinity towards stationary phase travels slower. Components with less affinity towards stationary phase travels faster.

       Once separation occurs, the individual components are visualized as spots at a respective level of travel on the plate. Their nature or character is identified by means of suitable detection techniques.

Components of Thin Layer Chromatography (TLC)

Thin Layer Chromatography Assignment



TLC system components consists of:

 

1.     TLC plates: preferably ready made with a stationary phase: These are stable and chemically inert plates, where a thin layer of stationary phase is applied on its whole surface layer. The stationary phase on the plates is of uniform thickness and is in a fine particle size.

2.     TLC chamber- This is used for the development of TLC plate. The chamber maintains a uniform environment inside for proper development of spots. It also prevents the evaporation of solvents, and keeps the process dust free.

3.     Mobile phase- This comprises of a solvent or solvent mixture The mobile phase used should be particulatefree and of the highest purity for proper development of TLC spots. The solvents recommended are chemically inert with the sample, a stationary phase.

4.     A filter paper- This is moistened in the mobile phase, to be placed inside the chamber. This helps develop a uniform rise in a mobile phase over the length of the stationary phase.

 

Procedure of Thin Layer Chromatography (TLC) 

Thin Layer Chromatography Assignment


The stationary phase is applied onto the plate uniformly and then allowed to dry and stabilize. These days, however, ready-made plates are more commonly used.

1.     With a pencil, a thin mark is made at the bottom of the plate to apply the sample spots.

2.     Then, samples solutions are applied on the spots marked on the line in equal distances.

3.     The mobile phase is poured into the TLC chamber to a leveled few centimeters above the chamber bottom.

4.     A moistened filter paper in mobile phase is placed on the inner wall of the chamber to maintain equal humidity (and also thereby avoids edge effect).

5.     Now, the plate prepared with sample spotting is placed in TLC chamber so that the side of the plate with the sample line is facing the mobile phase. Then the chamber is closed with a lid.

6.     The plate is then immersed, such that the sample spots are well above the level of mobile phase (but not immersed in the solvent) for development.

7.     Sufficient time is given for the development of spots.

8.     The plates are then removed and allowed to dry.

9.     The sample spots are then seen in a suitable UV light chamber, or any other methods as recommended for the given sample.

 

Some common techniques for visualizing the results of a TLC plate include;

1.     UV light

2.     Iodine Staining: is very useful in detecting carbohydrates since it turns black on contact with Iodine

3.     KMnO4 stain (organic molecules)

4.     Ninhydrin Reagent: often used to detect amino acids and proteins

Retention Factor (Rf ) Value

       The behaviour of a compound on a TLC is usually described in terms of its relative mobility or Rf value.

       Rf or Retention factor is a unique value for each compound under the same conditions.

       The Rf for a compound is a constant from one experiment to the next only if the chromatography conditions below are also constant:

       solvent system

       adsorbent

       thickness of the adsorbent

       amount of material spotted

       temperature

       Since these factors are difficult to keep constant from experiment to experiment, relative Rf values are generally considered.

       Relative Rf” means that the values are reported relative to a standard.

 

Applications of Thin Layer Chromatography (TLC)


In monitoring the progress of reactions;


v   Identify compounds present in a given mixture 

v   Determine the purity of a substance

v   Analyzing ceramides and fatty acids

v   Detection of pesticides or insecticides in food and water 

v   Analyzing the dye composition of fibers in forensics

v   Assaying the radiochemical purity of radiopharmaceuticals.


Tags:

  • what is thin layer chromatography
  • thin layer chromatography slideshare
  • thin layer chromatography pdf
  • thin layer chromatography lab report
  • thin layer chromatography principle ppt
  • instrumentation of thin layer chromatography
  • thin layer chromatography lab procedure